Specifications
AIRCRAFT WEIGHT: 23lbs
MAXIMUM PAYLOAD CAPABILITY: 45lbs
MAXIMUM ALL UP AIRCRAFT WEIGHT: 75lbs
BATTERY REQUIREMENTS: 4 x 6s 10,000 mAh - 16,000mAh
FLIGHT TIME: 9 - 30 Minutes (Depending on Camera and Battery Configuration)
MAX TESTED SPEED: 45 mph
POWER SYSTEM: DJI E5000 Pro Motor / ESC / Propeller / Motor Mount
GIMBAL: DJI Ronin 2 (Stock Gimbal - No Modifications Necessary *Requires DJI MotionBlock*)
GIMBAL POWER: Powered With 2 x TB-50 Batteries (Powers Gimbal and Camera for 2.5+ Hours)
CONTROL: DJI LightBridge 2 (Pilot & Gimbal Operator)
GUIDANCE: DJI A3 Pro Flight Controller
Interested?
Step Up To THE MFD 5000
PROVEN
Using DJI’s State-Of-The-Art Equipment: DJI A3, Lightbridge 2, E5000 Pro Power Package, and Ronin 2 Gimbal
POWERFUL
Capable of Lifting a Fully Loaded Ronin 2 At Over 45mph
INTUITIVE
Using DJI’s Lightbridge 2 with the DJI GO App, Operators Will Feel Like They Are Flying a Phantom With World- Class Camera Packages
REDUNDANT
Redundant Flight Controller IMU, GPS, Battery Configuration, Power System
TRANSPORTABLE
Easily Folds For Safe And Convenient Travel
LEGAL
All Up Weight Under 55lbs (Depending on Camera/Battery Package) for Legal FAA 107 Operation in the USA
MFD 5000 Production Aircraft
Here are some photos of the production version MFD 5000. This aircraft is intended to carry the Ronin 2 gimbal but can certainly be customized to carry other gimbals, payloads, and sensors. Everything seen in these photos can be included with your custom package including batteries, travel cases, telemetry sensors, etc. Contact Us for any further questions you may have!
MFD 5000 Overview, Assembly and Setup
Autonomous Flight Using Litchi - Waypoint Test Mission
MFD 5000 Payload Capacity + Flight Time Chart
Includes
The MFD 5000 Includes the Following:
- MFD 5000 Aircraft Ready to Fly (23lbs dry including isodamper & Ronin 2 Dovetail)
- E5000 Pro Motor / ESC / Propeller Combo in Hexacopter configuration
- DJI A3 Pro Flight Controller (includes 3 total IMU’s & 3 total GPS Antennae)
- Two Lightbridge 2 Transmitters (1 for Pilot and 1 for Gimbal Operator)
- Ronin 2 Aero Landing Gear (Fits stock DJI Ronin 2 Gimbal)
- Custom Iso-Damper, Which Reduces Shaking/Jello in Gimbal tuned for Ronin 2
- Travel Cases For Aircraft (Pelican AL 2624-2703) and Radios (Pelican/SKB or similar) with custom foam for Aircraft + Ronin 2 Aero Landing Gear
- Quick Release Battery Tray System with 4 carbon fiber battery tray plates
- Full Carbon Fiber Frame Construction
CONTACT US FOR PRICING / DELIVERY INFORMATION
DJI Ronin 2 Aero Landing Gear
Check out the latest Aero Landing Gear that we created for the Ronin 2 Gimbal with the assistance of the guys from XM2 Aerial in Australia. This aero landing gear seamlessly integrates with the Ronin 2, is super light weighing in at under 1lb, and is a breeze to install/disassemble while on set. It comes standard on all MFD 5000 drones that will be utilizing the DJI Ronin 2 gimbal.
This Aero Landing Gear is available for purchase separately. Please CONTACT US if you are interested in purchasing a set.
DJI Ronin 2 Aero Landing Gear Assembly Instructions
Curious How the MFD 5000 Was Design and Built?
Check Out the Full Blog Here:
We Offer Financing!
We Offer Affordable Options Through CIT For Customers Looking To Finance Their Aircraft
Interested In Purchasing the MFD 5000?