fbpx

THE ULTIMATE HEAVY LIFT DRONE

AVAILABLE IN MULTIPLE CONFIGURATIONS

STEP UP TO THE MFD 5000

Z

PROVEN

Using DJI’s State-Of-The-Art Equipment: DJI A3, Lightbridge 2, E5000 Pro Power Package, and Ronin 2 Gimbal

POWERFUL

Capable of Lifting a Fully Loaded Ronin 2 At Over 45mph

INTUITIVE

Using DJI’s Lightbridge 2 with the DJI GO App, Operators Will Feel Like They Are Flying a Phantom With World- Class Camera Packages

REDUNDANT

Redundant Flight Controller IMU, GPS, Battery Configuration, Power System

TRANSPORTABLE

Easily Folds For Safe And Convenient Travel

LEGAL

All Up Weight Under 55lbs (Depending on Camera/Battery Package) for Legal FAA 107 Operation in the USA

FULLY CUSTOMIZABILE – BUILT TO SPEC

40 LBS

75 LBS

45 MPH

10 TO 30 MIN

INTERESTED IN PURCHASING THE MFD 5000?

MFD 5000 CONFIGURATIONS

CINEMA EDITION

The MFD 5000 Cinema Edition was designed to be an intuitive heavy lifting cinema drone. This is for pilots who are comfortable and familiar with the DJI workflow and components. Utilizing the A3 Pro flight controller and Lightbridge 2, this drone acts just like a big Inspire 2, or Matrice 600. This aircraft meant to carry serious camera packages for the cinematography world.

MFD 5000 Film Version

INCLUDES:

  • MFD 5000 Aircraft Ready to Fly
  • E5000 Pro Motor / ESC / Propeller Combo in Hexacopter configuration
  • DJI A3 Pro Flight Controller (includes 3 total IMU’s & 3 total GPS Antennae)
  • Two Lightbridge 2 Transmitters (1 for Pilot and 1 for Gimbal Operator) (Radios are white in color, black radios are available for an additional $500)
  • Ronin 2 Aero Landing Gear
  • Custom Iso-Damper, Which Reduces Shaking/Jello in Gimbal tuned for Ronin 2 / Freefly Movi Pro
  • Travel Cases For Aircraft (Pelican AL ‪2624-2703‬) and Radios (Pelican/SKB or similar) with custom foam for Aircraft + Ronin 2 Aero Landing Gear
  • Quick Release Battery Tray System with 4 carbon fiber battery tray plates
  • Runcam FPV Camera
  • Built-in XT-90S connectors (or the connectors of your choosing) into the main frame
  • Full Carbon Fiber Frame Construction + custom engraving of your Logo into the airframe
  • Flight tested and approved by Watts Innovations 

SPECIFICATIONS:

AIRCRAFT DRY WEIGHT (Without Batteries): 23lbs
MAXIMUM ALL UP AIRCRAFT WEIGHT: 75lbs
BATTERY REQUIREMENTS: 4 x 6s 8,000 mAh – 16,000mAh
FLIGHT TIME: 9 – 30 Minutes (Depending on Camera and Battery Configuration)
MAX TESTED SPEED: 45 mph
POWER SYSTEM: DJI E5000 Pro Motor / ESC / Propeller / Motor Mount
GIMBAL: DJI Ronin 2 (Stock Gimbal – No Modifications Necessary *Requires DJI MotionBlock* for Aero Landing Gear Mounting) or Freefly Movi Pro
RONIN 2 GIMBAL POWER: Powered With 2 x TB-50 Batteries (Powers Gimbal and Camera for 2.5+ Hours)
AIRCRAFT CONTROL: DJI LightBridge 2 (Pilot)
GIMBAL CONTROL: Separate Radio Recommended
FPV VIDEO: From Lightbridge 2 to Pilot Radio
RED/ARRI VIDEO: Connex or Teradek Recommended
GUIDANCE: DJI A3 Pro Flight Controller (Triple IMU & GPS Redundancy)

MFD 5000 CINEMA EDITION DRONE

Here are some photos of the production version MFD 5000. This aircraft is intended to carry the Ronin 2 gimbal but can certainly be customized to carry other gimbals, payloads, and sensors. Everything seen in these photos can be included with your custom package including batteries, travel cases, telemetry sensors, etc.

DJI RONIN 2 AERO LANDING GEAR FOR CINEMA EDITION

Check out the latest Aero Landing Gear that we created for the Ronin 2 Gimbal with the assistance of the guys from XM2 Aerial in Australia. This aero landing gear seamlessly integrates with the Ronin 2, is super light weighing in at under 1lb, and is a breeze to install/disassemble while on set. It comes standard on all MFD 5000 drones that will be utilizing the DJI Ronin 2 gimbal.

This Aero Landing Gear is available for purchase separately. Please CONTACT US if you are interested in purchasing a set.

OPEN ARCHITECTURE EDITION

INCLUDES:

  • MFD 5000 Open Architecture Edition- Aircraft Ready to Fly 
  • Pixhawk 2.1 Blue Cube (Made in USA) Edition / (Loaded with stock ArduPilot firmware)
  • TMotor P80 III 120KV Motors w/ Folding 28″ Propeller Propulsion System (in Hexacopter Configuration)
  • Futaba 18SZ Radio with FASST S-BUS Receiver
  • 900mhz Modem Data Transmission system to utilize with Mission Planner or other software
  • Fixed, Foldable 25mm Landing Gear
  • Travel Cases For Aircraft (Pelican AL 2624-2703) and Radio (Pelican/SKB or similar) with custom foam for Aircraft
  • Quick Release Battery Tray System with 4 carbon fiber battery tray plates
  • Runcam FPV Camera
  • Built-in XT-90S/EC5 connectors (or the connectors of your choosing) into the main frame
  • Full Carbon Fiber Frame Construction + custom engraving of your Logo into the airframe
  • Flight tested and approved by Watts Innovations

SPECIFICATIONS:

AIRCRAFT DRY WEIGHT (Without Batteries): 23lbs
MAXIMUM ALL UP AIRCRAFT WEIGHT: 75lbs
MAXIMUM PAYLOAD: Up to 40lbs (Depending on Battery Configuration)
FLIGHT CONTROLLER: Pixhawk 2.1 / Other
BATTERY REQUIREMENTS: 4 x 6s 8,000 mAh-16,000mAh
FLIGHT TIME: 9-30 Minutes (Depending on Camera and Battery Configuration)
MAX TESTED SPEED: 45 mph
POWER SYSTEM: TMotor P80III Propulsion System with 28″ Propeller / DJI E5000 Propulsion System
AIRCRAFT CONTROL: Futaba / Frsky / HereLink
FPV VIDEO: Customizable
PAYLOAD ATTACHMENTS: Customizable

CLICK HERE to see a step-by-step instructional video showing how the MFD 3000 / 5000 Open Architecture Version works, utilizing the Pixhawk 2.1/Cube Flight Controller with the HereLink radio system.

 

FULLY CUSTOMIZABLE

Allow us to customize your drone. We can engrave your logo, integrate the connectors of your choice, FPV cameras, HDMI transmitters, etc.

CURIOUS HOW THE MFD 5000 WAS DESIGNED AND BUILT?

Check Out The Full Story Here:

MFD 5000 FAQ

What is the expected flight time of the aircraft?

Depending on payload and battery size, the expected average flight time is anywhere from 9 to 35 minutes using Lithium Polymer Batteries. Please see the chart for expected flight time.

What is the maximum operating weight of the aircraft?

We recommend flying this aircraft at no more than 75lbs.

What kind of payload can I lift while staying under 55lbs?

Depending on your battery and payload configuration, users can expect a 12 minute flight time with a 20lb payload, all while staying under 55lbs. If a user wishes to have a 10 to 15lb payload, a 20 to 25 minute flight time is expected. Please see the charts for expected flight time.

How are your drones made?

All drones are made to order based on the customer’s requirements. Typically we average a 8 week delivery time. It is possible to add FPV cameras, voltage regulators, payload deployment mechanisms, retractable landing gear, etc. Please contact us with any special requests.

What else do you offer besides drones?

In addition to offering a customized drone for your needs, we also offer the entire package to get your aircraft up and running including radio transmitters, lithium polymer batteries (with your desired connectors pre-soldered), high powered charging solutions, battery cases, radio cases, etc. Our goal is to provide you with a fully inclusive customized drone package that will allow you to hit the ground running once you have received your drone.

Does the drone come ready to fly?

Yes, absolutely! Before leaving our facility, your drone will be fully flight tested and tuned for proper flight characteristics, performance, control “feeling”, and autonomous flight. Our flight tests are quite rigorous and are meant to detect any sort of manufacturer’s defect or error. Once the drone has been shipped and received by the customer, it is recommended to perform a compass calibration before flying.

How does the process work? How do I acquire one of your drones?

Prospective customers can contact us at any time and tell us about their proposed operation and what they are looking for in an aerial platform. Based on that, we can begin a discussion about how to provide you and your business with an aircraft that is going to fit your needs. Once the customer has decided upon a design and all necessary options, production begins. Typical delivery times are anywhere between 4 and 8 weeks depending on customizations.

Do you offer customer support?

Absolutely, we pride ourselves on some of the best customer support in the industry. You can reach us by phone, mail, text, Instagram DM… you name it! We truly value and understand the rigors of being in a high stress environment operating drones for a profession, so we do our absolute best to go out of our way to take care of our customers in any way possible.

 

MFD 5000 OVERVIEW, ASSEMBLY AND SETUP

AUTONOMOUS FLIGHT USING LITCHI WAYPOINT TEST MISSION

Interested in the MFD 5000? Contact Us For A Quote

WE OFFER FINANCING!

We Offer Affordable Options Through CIT For Customers Looking To Finance Their Aircraft